Common Problems With Pressure Washers and How to Fix Them
It’s no secret that pressure washers can be incredibly useful tools for cleaning everything from driveways and decks to cars and boats. However, if your pressure washer isn’t working properly, it can quickly become a major headache.
In this article, we will discuss some of the most common problems people experience with their pressure washers and how to fix them.
Complete Breakdown
One of the most common issues people have with their pressure washers is that they stop working altogether. If your pressure washer suddenly stops working, the first thing you should check is the power cord. Make sure that it is plugged into a functioning outlet and that the circuit breaker has not been tripped. If everything seems to be in working order, the next step is to check the oil level in the engine. If the oil is low, add more and try starting the pressure washer again. If the engine still won’t start, there may be an issue with the spark plug. Try cleaning or replacing it and see if that solves the problem.
Water Leak
Another common issue people have with their pressure washers is that they leak water. If your pressure washer is leaking water, the first thing you should do is check the seals on the pump. Over time, these seals can become damaged and will need to be replaced. You can find replacement seals at most hardware stores. Once you have replaced the seals, make sure you are using the correct amount of pressure when operating the pressure washer. Too much pressure can cause the seals to fail again.
Nozzle Issues
Another common problem people experience with their pressure washers is that the nozzle becomes clogged. This can happen for a variety of reasons, such as using the wrong type of detergent or letting the detergent sit in the nozzle for too long. If your nozzle becomes clogged, the best thing to do is remove it and soak it in a solution of vinegar and water. After a few hours, the clog should be loosened and you should be able to clean it out easily.
Engine Won’t Start
If your pressure washer’s engine won’t start, the first thing you should check is the oil level. If the oil is low, add more and try starting the pressure washer again. If the engine still won’t start, there may be an issue with the spark plug. Try cleaning or replacing it and see if that solves the problem.
If your pressure washer is still not working properly after following these tips, it may be time to call a professional. A qualified technician will be able to diagnose and fix the problem quickly and efficiently. Contact a local pressure washer dealer or repair shop today to schedule an appointment.
